Why does my Mindray DC-30 fail to start on battery but works with AC power?
If your Mindray Medical Equipment fails to start on battery power but works with AC power, and a battery alarm appears after startup, it's likely the internal battery has failed. In this case, the suggested solution is to replace the battery.
What to do if Mindray DC-30 Medical Equipment won't start without AC input and battery indicator flashes?
If your Mindray Medical Equipment has no AC input and fails to start on battery power, with the power indicator flashing before turning off, and the battery indicator flashing, it means the battery is likely out of power. To resolve this, charge up the battery.
General| DICOM | Yes |
|---|---|
| Hard Drive | 500 GB |
| Continuous Wave Doppler | Yes |
| Tissue Harmonic Imaging | Yes |
| Relative Humidity | 30% to 85% (non-condensing) |
| Imaging Modes | Color Doppler, Power Doppler |
| Power Supply | 100-240 V~ 50/60 Hz |
| Probe Connectors | 2 active probe connectors |
| Probe Types | Convex, Linear, Phased Array |
| Operating Temperature | 10°C to 40°C |
| Storage Temperature | -20°C to +55°C |
| Transducer Ports | 2 |
Details safety precautions for patient and operator use, covering electric, mechanical, and personnel safety.
Details system specifications: dimensions, electrical, environmental, and monitor.
Covers electrical requirements, installation conditions, and pre-installation confirmations.
Outlines the procedure for unpacking the main unit and its components.
Details the process of installing the main unit, including display adjustment and connections.
Covers the installation of various peripherals like footswitch, printers, and adapters.
Guides through system configuration, including running, presets, network, and DICOM settings.
Details how to check the system's running status and environment.
Covers detailed functional checks across different imaging modes (B, M, Color, PW).
Outlines procedures and content for performance testing like resolution and depth.
Guides on how to log in and access the system's maintenance window.
Covers procedures for backing up and restoring system preset and patient data.
Provides instructions for disassembling and assembling system modules and parts.
Covers system alarms and abnormal information logging for voltage, temperature, and fan issues.
Addresses issues related to the system not powering on.
Addresses issues when the system fails to start up normally.
Explains how to measure patient leakage current for applied parts.
Details the test for mains on applied part leakage.
To Next Page
