Mindray DC-30 Service Manual

System Installation 3-27
3.5.8 System Information
In System Information screen, it displays the product configuration, the optional
installation status, software version, hardware & boards, and driver related information.
You can check the product information here.
1. Press the <Setup> and click [About].
2. Click [About Detail] to check the detailed board information select
[Preset]->[Maintenance]->[Option] to see the detailed optional information of the
system.

Mindray DC-30 Specifications

General

DICOM	Yes
Hard Drive	500 GB
Continuous Wave Doppler	Yes
Tissue Harmonic Imaging	Yes
Relative Humidity	30% to 85% (non-condensing)
Imaging Modes	Color Doppler, Power Doppler
Power Supply	100-240 V~ 50/60 Hz
Probe Connectors	2 active probe connectors
Probe Types	Convex, Linear, Phased Array
Operating Temperature	10°C to 40°C
Storage Temperature	-20°C to +55°C
Transducer Ports	2