Mindray DC-30 Service Manual

3-28 System Installation
3. Click [Save] or click [Exit] to exit the preset menu.
4. Select <Setup>->[Maintenance]->[Others]->[Export] to see the current system
information of the exported log
NOTE:
1.
Be sure to confirm the system information before and after the software
maintenance.
2.
Ask the user to save the current system information if necessary.

Mindray DC-30 Specifications

General

DICOM	Yes
Hard Drive	500 GB
Continuous Wave Doppler	Yes
Tissue Harmonic Imaging	Yes
Relative Humidity	30% to 85% (non-condensing)
Imaging Modes	Color Doppler, Power Doppler
Power Supply	100-240 V~ 50/60 Hz
Probe Connectors	2 active probe connectors
Probe Types	Convex, Linear, Phased Array
Operating Temperature	10°C to 40°C
Storage Temperature	-20°C to +55°C
Transducer Ports	2