6-2 Software installation and Maintenance
6.2 Set Installment
If the customer purchases the product with the installment, the service can set
installment and the installment password will be generated by the system automatically.
Log on the system with the identity of Service before perform system
maintenance.
1. Press [Setup]. Select [Maintenance] -> [Other] -> [Installment]. Click [Set
Installment], and set the times of the installment in “Periods” list. Set the time interval
of each installment in “Days” list, as shown below.
2. Click [Generate], and tick off “Display Password”. The password generated by the
system will be displayed in “Password List”, as shown below.
To Next Page
Loading...
