Mindray DC-30 Service Manual

3-22 System Installation
3.5.4 Exam Mode Preset
Press <Setup>->[Exam Preset] to enter the following screen.
You can set exam modes for different probes.
3.5.5 Measurement Preset
Press <Setup>->[Measure Preset] to enter the following screen.

Mindray DC-30 Specifications

General

DICOM	Yes
Hard Drive	500 GB
Continuous Wave Doppler	Yes
Tissue Harmonic Imaging	Yes
Relative Humidity	30% to 85% (non-condensing)
Imaging Modes	Color Doppler, Power Doppler
Power Supply	100-240 V~ 50/60 Hz
Probe Connectors	2 active probe connectors
Probe Types	Convex, Linear, Phased Array
Operating Temperature	10°C to 40°C
Storage Temperature	-20°C to +55°C
Transducer Ports	2