Mindray DC-30 Service Manual

System Installation 3-23
You can set measurement tools adopted under each mode (B/M/Doppler)
3.5.6 Print Preset
For details, please refer to “3.4.2 Installing a Graph / Text Printer” chapter.
3.5.7 Network Preset
3.5.7.1 Network Preset
Open “[Setup] → [Network Preset] to enter the preset screen.

Mindray DC-30 Specifications

General

DICOM	Yes
Hard Drive	500 GB
Continuous Wave Doppler	Yes
Tissue Harmonic Imaging	Yes
Relative Humidity	30% to 85% (non-condensing)
Imaging Modes	Color Doppler, Power Doppler
Power Supply	100-240 V~ 50/60 Hz
Probe Connectors	2 active probe connectors
Probe Types	Convex, Linear, Phased Array
Operating Temperature	10°C to 40°C
Storage Temperature	-20°C to +55°C
Transducer Ports	2