What to do if Mindray DC-70 Pro system cannot power on?
If the Mindray Medical Equipment system fails to power on, begin by checking the backlight of the power button. Also, inspect the AC indicator on the control panel and verify the three power supply indicators on the IO back board.
General| Touch Screen | Yes |
|---|---|
| Touch Panel | Yes |
| Transducer Ports | 4 |
| Battery Backup | Yes |
| 3D/4D Imaging | Yes |
| Operating System | Windows-based |
| Power Supply | 100-240V AC, 50/60 Hz |
| Storage | 500GB HDD |
| Connectivity | USB, HDMI |
| Applications | Cardiology, Obstetrics, Gynecology |
| Imaging Modes | Color Doppler, Power Doppler |
| Ports | USB, Ethernet, HDMI |
| Display Size | 19 inch |
Details electrical safety measures to prevent electric shock and equipment damage.
Outlines safety procedures for moving and handling the system to prevent physical injury.
Covers dimensions, weight, electrical, environmental, and monitor specifications of the system.
Details site requirements, electrical needs, and environmental conditions for system installation.
Guides the user through the physical installation of the main unit, including monitor, power, ECG, and transducer connections.
Details the installation steps for peripherals like footswitches, printers, and barcode scanners.
Explains how to configure the system, set up network settings, and manage system presets.
Explains how to check B mode, Color mode, Doppler mode, M mode, and related parameters.
Details tests for resolution, maximum depth, geometric positioning accuracy, and blackout area.
Provides instructions for entering Windows, installing/restoring software, and activating the operating system.
Details how to adjust monitor position, brightness, contrast, and perform monitor tests.
Lists common alarms and errors with their causes, LOG records, and suggested troubleshooting solutions.
Describes how to perform maintenance and user self-tests, and how to interpret the resulting test reports.
Addresses problems related to the system failing to power on or start up, with cause analysis and solutions.
Covers common image issues like no echo, dark strips, and noise, providing specific troubleshooting steps.
Explains the procedures for testing protective earth resistance, earth leakage, and mains voltage on applied parts.
Covers testing patient leakage and auxiliary currents for electrical safety compliance, including specific limits.
To Next Page
