Mindray DC-70 Pro User Manual

System Installation 3-23
NOTE:
Only if DICOM basic option is configured, Worklist page is available.
3.5.9 Check System Information
In System Information screen, it displays the product configuration, the optional installation status,
software version, hardware & boards, and driver related information. You can check the product
information here.
1. Press <Setup>, and then click [System Info] to open the following screen.
2. Log on as service. On About Detail page, system hardware & board related information can be
seen.
NOTE:
1. Be sure to confirm the system information before and after the software
maintenance.
2.
If necessary, please ask the user to save the current system information.

Mindray DC-70 Pro Specifications

General

Touch Screen	Yes
Touch Panel	Yes
Transducer Ports	4
Battery Backup	Yes
3D/4D Imaging	Yes
Operating System	Windows-based
Power Supply	100-240V AC, 50/60 Hz
Storage	500GB HDD
Connectivity	USB, HDMI
Applications	Cardiology, Obstetrics, Gynecology
Imaging Modes	Color Doppler, Power Doppler
Ports	USB, Ethernet, HDMI
Display Size	19 inch