Mindray DC-70 Pro User Manual

Care and Maintenance 12-3
12.2 Cleaning
12.2.1 System Cleaning
12.2.1.1 Cleaning Flow
Clean dust-proof covers
Clean monitor and touch screen
Clean trackball
Clean holders
Clean cover
Clean probes
Clean control and minor panel
Power off and pull out the
power cables
Fig 12-1 The View of Cleaning Maintenance
WARNING:
Before cleaning the system, be sure to turn off the power and
disconnect the power cord from the outlet. If you clean the system
while the power is “On”, it may result in electric shock.
12.2.1.2 Procedures
1. Dust-proof cover cleaning
Including dust-proof mesh of the trolley and dust-proof mesh of probe socket.
 Tool: soft brush
 Method:
a) Remove dust-proof mesh/cover before cleaning.
Dust-proof mesh of the trolley: release the clasps of the mesh to arrow’s direction. Pull the
dust-proof mesh towards the front of the trolley to let the mesh fall off. Then, remove the
dust-proof mesh.

Mindray DC-70 Pro Specifications

General

Touch Screen	Yes
Touch Panel	Yes
Transducer Ports	4
Battery Backup	Yes
3D/4D Imaging	Yes
Operating System	Windows-based
Power Supply	100-240V AC, 50/60 Hz
Storage	500GB HDD
Connectivity	USB, HDMI
Applications	Cardiology, Obstetrics, Gynecology
Imaging Modes	Color Doppler, Power Doppler
Ports	USB, Ethernet, HDMI
Display Size	19 inch