Mindray DC-80 EXP

Setup 12-3
12.1.2 General
Open the page via [Setup]-> [System]-> [General].
Type
Item
Description
Patient Info
Info displays in image
banner
To select if to display the available patient information
items on the screen.
H&W Unit
To set the unit for patient height and weight.
Surface Formula
To set the surface formula.
Freeze
Setting
Enter after the freeze
To set the system state after the image is frozen.
Exam Setup
Status after exam ends
To set the system status when an exam ends.
Patient
Management
Sending/printing after End
Exam
Select if to automatically archive the exam data to
DICOM server for storage/print.
Display
Main screen preset
To set the brightness and the contrast of the main
screen, or restore to the default.
Brightness auto
adjustment
To set the brightness/contrast of the main screen and
the touch screen according to the conditions.
Touch screen preset
After selection, the system restores the touch screen
settings back to factory.