Image Control and Adjustment
6-7
1
In the B, B/B or M/B mode, press <Zoom/Depth> knob to light the Zoom indicator,
and a frame appears on the center of image.
Note that in the B/B mode, only the active window can be zoomed.
2 Move the trackball to move the frame to select the zoom center.
3
Rotate <Zoom/Depth> to change the size of frame. The zoom percentage changes
with it.
4
Press
<Set> and the frame disappears. The zoomed image is displayed.
5 You can move the trackball to move the zoomed image.
6 Rotate <Zoom/Depth> to change the zoom percentage of image.
7 Press <Set> to fix the center of zoomed image. The cursor appears.
8 Rotate <Zoom/Depth> to change the zoom percentage of image.
9 Press <Zoom/Depth> or <Esc>. The indicator lights off, the zoom status exits and
normal image is displayed.
6.3 Image Reverse
B images (including real-time, frozen, cine images, opened FRM files and zoomed images)
can be reversed horizontally or vertically.
In the B, B/B or M/B mode, press [Menu] to display the image menu, and select [V.Rev] or
<H.Rev> to reverse the image vertically or horizontally.
Frame
400%
To Next Page
Loading...
