Mindray Eagus R9 User Manual

System Installation 3-25
3.7 System Configuration
3.7.1 Running the System
Connect the AC power; make sure the ultrasound system and other optional devices are correctly
connected.
When the AC power indicator on the control panel is on (indicator
is in green), press the power
button
on the control panel to turn on the system.
3.7.2 Entering Doppler
After the system is activated and the initialization is completed (about 1 minute), it enters Doppler
interface, see the figure below:

Mindray Eagus R9 Specifications

General

Brand	Mindray
Model	Eagus R9
Category	Diagnostic Equipment
Language	English