What to do if the power indicator blinks on my Mindray Medical Equipment?
If the AC indicator is on, but the power on/off indicator is off or blinking after pressing the button on your Mindray Medical Equipment, the cause may be an error from the main board of the power supply. The suggested solution is to replace the main board.
Why is my Mindray M9Vet Medical Equipment running on battery when plugged in?
If the system power supply adaptor AC power indicator remains off, and the Mindray Medical Equipment starts using battery power, there are two potential causes: either there is no AC input, or there is an error from the power supply adaptor. To resolve this, first, re-check the AC connection. If the problem persists, replace the power supply adaptor.
What to do if Mindray Medical Equipment doesn't work on battery?
If your Mindray Medical Equipment only works when connected to the power supply adaptor and fails to operate solely on battery power, it could be due to low battery capacity or a battery module error. First, try charging the battery module. If the issue persists, consider replacing the battery module.
How to fix Mindray Medical Equipment when AC power indicator is off?
If the AC power indicator remains off and your Mindray Medical Equipment starts using battery power, there could be two potential causes: either there is no AC input, or there is an error from the power supply adaptor. First, re-check the AC connection. If the problem continues, replace the power supply adaptor.
General| RAM | 4 GB |
|---|---|
| Storage | 500GB hard disk |
| Transducer Ports | 2 |
| Operating System | Windows Embedded |
| Supported Probes | Linear, Convex, Phased Array |
| Ports | USB |
| Display | 15-inch LED-backlit LCD |
| Transducer Compatibility | Compatible with a wide range of transducers |
To Next Page
