Mindray Nuewa I9 - Page 214

5-140 Image Optimization
Reset Width (Reset W)/Reset Level (Reset L)
Description It initializes the window width and window level of the CT/MR/PET/freehand image.
Operation Tap [Reset W/L] to initialize the width/level of the CT/MR/PET/freehand image.
Reset CT/MR/PET/Freehand
Description
It initializes CT/MR/PET/freehand image when CT/MR/PET/freehand image is cycled
axially, panned, scrolled or zoomed, etc., after CT/MR/PET/freehand volume data is
imported to Ultrasound System.
Operation Tap [Reset CT/MR] to initialize the CT/MR/PET/freehand image.
Tint Map
Description
This function provides an imaging process based on color difference rather than gray
distinction for CT/MR/PET/freehand image.
Operations Rotate the knob under the [Tint Map] item on the touch screen to select the map.
The system provides 8 different color effect maps.
Press the knob under the [Tint Map] item on the touch screen to turn on/off the
function.
Single Window
Description If the feature is enabled, only the image at the upper left is displayed on the image
area.
Operation Tap [Single Window].
Rotate
180°
Description
This function is to rotate CT/MR/PET volume data 180 degrees before registration.
Operations
Tap [Rotate 180°].
B Display
Description
This function is to set whether to display B-mode image under Color fusion imaging
mode.
Operations Tap [B Display].
If [B Display] is highlighted, the B-mode image is displayed.
If [B Display] is not highlighted, the B-mode image is hidden.
5.17.11 Rotating/Scrolling CT/MR/PET/Freehand Image
The Ultrasound System sets the CT/MR/PET/freehand volume data to 3-dimensional image after the
CT/MR/PET/freehand image is imported to iStation. Each of any CT/MR/PET/freehand anatomical
planes (2-dimensional) appears on the screen via rotating or scrolling the CT/MR/PET/freehand image.