Comments and Body Mark 9-5
9.1.6 Deleting Comments
Deleting Comments Characters, Texts or Arrows
1. Move the cursor to the comments to be deleted.
2. Press <Set> to select the comments.
3. Press <Back>, <Del>, <Delete Word> or <Clear> to complete the deletion.
Or, rotate the knob under [Grab/Del] on the touch screen to select the comment, then press the knob to
delete the comment.
Deleting a recently-added character, text or arrow
In comment status, press <Clear> to delete the latest added/modified comment unit.
Enter letters by pressing the alphanumeric key on the keyboard and use blank key to divide the
letters. Press user-defined key (<F10> -> [System Preset] -> [iConsole&Footswitch]/[Key Board])
for “Delete Word” to delete latest added/modified comment unit and enter comment status.
Delete letters one by one
In comment editing status, press <Back> to delete letters before cursor “|”.
In comment editing status, press <Del> to delete letters after cursor “|”.
In comment status, enter letters by pressing the alphanumeric key on the keyboard. Press user-
defined key for “Delete Te x t ” to delete letters before cursor “|” (<F10> -> [System Preset] ->
[iConsole&Footswitch]/[Key Board]).
Erase All Text
Press <Delete Word> key, long press <Clear> key, or tap [Del Text] on the touch screen to delete
all the comments.
NOTE:
1. When no item is selected, press <Clear> will clear all comments and all
measurements calipers.
2. After powering off, the system will clear all comments on the image.
9.1.7 Comment Settings
See Chapter 12.4 Comment Preset for comment preset.
Comments Setting
Enter the “[System][Application]” screen to perform the following settings:
Besides, you can preset whether to clear the comments when unfreezing the image or change the
probe/ exam.
Set if body mark is erased when the image is unfrozen.
9.2 Voice Comments
The system supports adding voice comment to the frozen images.
NOTE: it only supports the vocal input from the wired microphone.
To Next Page
Loading...
Need help?
General
