Need help?Do you have a question about the Mindray BeneVision N17 and is the answer not in the manual?
General| Display Size | 17 inches |
|---|---|
| Display Type | TFT LCD |
| Resolution | 1280 x 1024 pixels |
| Battery Life | Up to 4 hours |
| Power Supply | 100 - 240 VAC, 50/60 Hz |
| Monitoring Parameters | ECG, SpO2, NIBP, Temperature |
| Connectivity | Wired and Wireless |
General safety information including Danger, Warning, Caution, and Notes.
Information on symbols used on the product and its packaging.
Introduction to the BeneVision N series patient monitors.
Details on the system architecture of N17/N15/N12 monitors.
Diagram illustrating the data flow within the monitor system.
Guidelines for ensuring proper monitor function through regular inspection and testing.
Lists required test equipment for specific procedures.
Recommended procedures for routine maintenance and calibration.
Details the recommended frequency for various maintenance checks and tests.
Procedures for visually inspecting the equipment for damage and wear.
Procedures for testing Non-Invasive Blood Pressure (NIBP) functionality.
Tests for Sidestream and Microstream CO2 monitoring modules.
Procedures for testing Anesthetic Gas (AG) monitoring modules.
Verifies the patient monitor powers up correctly and starts up.
Comprehensive performance testing for various patient monitoring modules.
Tests the performance of the nurse call relay functionality.
Tests the analog output signals for various parameters.
Essential tests to ensure the electrical safety of the device.
Procedures for checking the functionality of the built-in recorder.
Tests the ability to print over the network.
Procedures for testing the battery function and performance.
Checks the safety and proper installation of the monitor's mounting.
Overview of common problems and troubleshooting measures.
Guidance on replacing main parts and components of the monitor.
Steps to check the monitor before powering it on to prevent damage.
How to check the software version for compatibility.
Procedures for checking and resolving technical alarm messages.
Detailed guide for diagnosing and resolving various system failures.
Overview of optional modules and assemblies for the monitor.
Lists and describes the available external parameter modules.
Details on optional functional upgrades and assemblies.
Lists the required tools for disassembly and repair.
Important preparation steps before disassembling the monitor.
Step-by-step guide to disassembling the main unit of the monitor.
Detailed steps for disassembling the front case assembly.
Detailed steps for disassembling the rear case assembly.
Procedures for further disassembly of the base assembly.
Instructions for disassembling the module rack.
Steps for disassembling the MPM module.
Exploded views and parts list for the N12 model.
Exploded views and parts list for the N15 model.
Exploded views and parts list for the N17 model.
Inspection criteria for the power cord plug and body.
Visual and contextual inspection of the device enclosure and accessories.
Check for the presence and legibility of device labels.
Guidelines for performing scheduled electrical safety inspections.
Specifies test items required after equipment repair.
Details the specific tests and limits for electrical safety inspection.
To Next Page
