10-4 Patient Data Management
Setting method (taking “Save Image” as an example, add the auxiliary functions “Send Image to
DICOM Storage” and “Send Image to USB disk”):
1. Set the user-defined key through the path: [Setup][System] [iConsole&Footswitch]/[Key Board].
Select “Save Image” in the Output column.
2. The system will automatically show the available auxiliary functions for current key. Select “Send
Image to DICOM Storage” and “Send Image to USB Disk”.
3. Click [OK] to confirm.
4. Scan and freeze the image
5. Press the user-defined key, then the system will perform three steps: 1. Save the image to the local
hard disk; 2. Send image to DICOM Storage server; 3. Send the image to USB disk.
Tips: repeat step 2 will continue adding auxiliary functions; you can add 6 functions at most.
10.2.9 Thumbnails
The stored images or cineloops are displayed in the form of thumbnails on the screen:
During image scanning, thumbnails of the current exam display on the right of the screen.
In the iStation screen, the thumbnails of the current selected patient display at the bottom of the
screen. When you move the cursor onto a thumbnail, its name and format will display.
On the [Review] page, the thumbnails refer to the images stored in the same exam. When you
move the cursor onto a thumbnail, its name and format will display.
On the Review page, open images to enter the image analyzing status, all the thumbnails
belong to the exam are displayed.
10.2.10 Image Review and Analysis
The system supports the image review and analysis to the saved patient image.
10.2.10.1 To review images
Image review: you can review all images stored in an exam, and send, delete or analyze the stored
images.
To enter image review:
During image scan, saved image thumbnails will be displayed on the right of the screen. Move
the cursor onto a thumbnail, and press <Set> twice to open the image; if the stored image is a
cine file, double-click the thumbnail to enter the auto cine review.
During mapping mode, tap
and to review the last and next image, or slide to left or
right on the touch screen to review the image
Tap [Review] to enter review page. Images of the current exam and the current patient are
displayed.
Select an exam of a patient in the iStation screen, and click <Review Image> or double-click
the exam to enter the Review screen to review the images of the patient.
The Review screen is shown as follows:
To Next Page
Loading...
Need help?
General
