Setup 12-13
Parameter Description
Status
No driver: click [SetupDriver] to enter the "TAP-Windows 9.21.2 Setup"
interface, and do as instructed.
Ready: the VPN is ready for use.
Advance: VPN Advance Configuration
Connected: VPN is successfully connected.
Disconnected: VPN is disconnected.
Error: error connection.
Server IP
/
Group
User Name
Password
Hide characters The password is displayed as *.
Connect/ Disconnect Connect or disconnect VPN.
Advance
Enters the "VPN Advance Config" interface.
Reset: if the system does not respond after you click [Config], click
[Reset].
Config: enters the "OpenConnect-GUI VPN client" interface. For details
about the settings, please refer to the TAP manual.
Note: after exiting the "VPN Advance Config" interface, you need to reboot
the system; otherwise, you cannot connect VPN normally.
Close Close the "VPN Config" interface.
Turn on Wi-Fi function:
1. Select [Network Settings] page in Network Preset screen.
2. Click [Enable Wifi] in the screen.
12.8.2 iStorage Preset
You can send exam data or images to the iStorage server and perform analysis using UltraAssist. For
details about this feature, see the UltraAssist manual.
To Next Page
Loading...
