Introduction Parts Replacement
3 - 2 0070-10-0634 Panorama® Service Manual
3.1 Introduction
This section of the service manual contains a list of replacement parts for the Panorama
Patient Monitoring Network.
3.2 Available Replacement Parts and Assemblies
Replacement parts at a board or assembly level are available. In most cases, individual
components on boards and assemblies are not available. Contact the Service Department or
your local authorized Service Representative for additional details.
3.3 Product Variations
Product variations, due to differences in line voltages or option differences, may require
different components. These variations are reflected, where necessary, on the parts lists.
3.4 Exchange Program
An exchange program for many circuit boards and assemblies is available. This program
provides the most expedient method of servicing the equipment. A standard charge for this
service is made. Contact the National Repair Center in Mahwah, New Jersey for details
concerning this program.
Panorama printed circuit boards make extensive use of multi-layer and surface-mount
technology. Individual component replacement is not recommended on these boards. Board
exchange or replacement is the most efficient method of repair for these types of assemblies.
Circuit board and assemblies that show evidence of improper repair techniques and that are
damaged in the process are not considered for exchange. Damaged boards are invoiced at
full value and no exchange credit is applied.
3.5 Parts Pricing Information
Current replacement parts and exchange charges are determined by contacting the Order
Entry Department.
To Next Page
Loading...
