What to do if alarm lamp does not light or extinguish on Mindray PM-60 Medical Equipment?
If the alarm lamp on your Mindray Medical Equipment does not light up or extinguish, but the alarm sound is working, the main board may be defective and require replacement.
What to do if bootstrap program upgrade fails on Mindray Medical Equipment?
If the bootstrap program upgrade fails on your Mindray Medical Equipment due to power failure or unintended power off during the upgrade, return the main board to the factory for repair if you cannot start up the pulse oximeter.
General| Data Storage | Up to 72 hours of trend data |
|---|---|
| Device Type | Handheld Pulse Oximeter |
| Display | TFT LCD |
| Measurement Range | SpO2: 0-100% |
| Power Supply | AC Adapter |
Describes the manual's scope and intent for troubleshooting and repair.
Specifies target users like engineers and technicians for maintenance.
Details manual version and release date for tracking updates.
Provides the maintenance password for access.
Explains hazard levels (Danger, Warning, Caution, Note) and equipment symbols.
Introduces the oximeter's function and system connection methods.
Describes the ports for connecting sensors and communication devices.
Details the core processing, control, and interface functions.
Explains the power module, input/output voltages, and charging circuit.
Lists all connectors and their purposes on the main circuit board.
Describes the functionality and circuit design of the SpO2 sensor module.
Provides technical details for the device's charger stand.
Outlines the importance of testing and how to record results for service.
Procedures for checking physical condition and successful device startup.
Covers SpO2 accuracy, motion mode, and electrical safety checks.
Verifies data output ports (RS232, Infrared) and software upgrade process.
Overviews the troubleshooting approach and guidance on replacing components.
Procedures for checking software versions and addressing technical alarms.
Details symptoms, causes, and corrective actions for typical device issues.
Lists required tools and crucial safety steps before disassembling the unit.
Provides detailed instructions for taking apart the pulse oximeter.
Lists exploded views and parts for the main unit and front panel assemblies.
Details components of the main circuit board and the battery adjusting bracket.
Lists rear cover components and a comprehensive replacement parts list.
To Next Page