13-36 Probes and Biopsy
NGB-047
1. Put on the sterile transducer sheath.
2. Open the clamp. Insert the front clamp to the front groove.
3. Push the biopsy forward (arrow’s direction) until the locating pole inserting into the location hole.
Turn the lower clamp against the intra-cavity probe. Tighten the nut to lock the biopsy (arrow’s
direction).
NGB-051 metal/needle detachable needle-guided bracket
(1) Put on the transducer cover.
(2) Cover the support of needle-guided bracket on the transducer, making the groove of the
needle-guided bracket to match with the tab of the transducer. Set the needle-guided bracket
at the desired position, turn tightly the knob of fixing needle-guided bracket to fix the needle-
guided bracket.
To Next Page
Loading...
