Mindray Resona R9 Service Manual

9-36 Structure and Assembly/Disassembly
4. Unscrew 2 M4 X 12 cross panhead screws on drag chain holder-1 with screwdriver (M3, M4) to
pull the wires out.
5. Press the clip towards the arrow’s direction to disconnect the connectors of the
electromagnets.
6. Unscrew 12 M5 X 12 round inner head screw (with the pad) from the support arm’s cover with
M5 inner hexagon spanner to remove the moving assembly of the control panel.

Mindray Resona R9 Specifications

General

Brand	Mindray
Model	Resona R9
Category	Diagnostic Equipment
Language	English