Mindray V21 Quick Reference Guide

P/N: 0002-08-50038-00 Rev A
18
Quick Reference Guide
V
V
V
Set A Non-Invasive Blood Pressure Measurement Interval
The V12 or V21 bedside monitor allows the clinician to set an interval for a
NIBP measurement to be obtained automatically.
To set an automatic interval on the V12 or V21 bedside monitor:
a. Select NIBP Interval* (Quick Function tab) repeatedly to the preferred
interval
Or
a. Select NIBP tile
b. Select Setup tab
c. Select Interval
d. Scroll and select interval
e. Select Accept to save settings and to return to the main screen
Note: When a NIBP interval is first selected, Start NIBP must be selected. If
the NIBP interval is adjusted, Start NIBP is not required. Start NIBP must be
re-selected if the NIBP interval is interrupted (i.e. Standby, NIBP Stop, etc).
During NIBP cuff inflation, to stop all NIBP measurements on a patient on the
V12 or V21 bedside monitor:
a. Select on the VPS module
Or
a. Select Stop NIBP* (Quick Function tab)
Or
a. Select NIBP tile
b. Select Stop NIBP
c. Select Accept to return to the main screen
Note: NIBP Start must be selected to resume interval.
*Configurable

Mindray V21 Specifications

General

Brand	Mindray
Model	V21
Category	Medical Equipment
Language	English