Need help?Do you have a question about the Mindray BeneFusion VP5 and is the answer not in the manual?
General| Brand | Mindray |
|---|---|
| Model | BeneFusion VP5 |
| Category | Medical Equipment |
| Language | English |
Provides essential safety instructions, warnings, and cautions for operating the device safely.
Details critical hazards and precautions to prevent death, serious injury, or property damage.
Outlines potential hazards and precautions to prevent minor injury or equipment malfunction.
Explains the meaning of various symbols used on the device and in the manual.
General description of the infusion pump, its purpose, and applications.
Defines the purpose and clinical applications of the infusion pump.
Details the physical components and key features of the infusion pump.
Focuses on the main unit of the infusion pump.
Illustrates and describes the components visible on the front panel of the pump.
Details the components and ports located on the rear of the infusion pump.
Shows the pump with its door open, revealing internal loading mechanisms.
Covers the initial setup procedures for the infusion pump.
Specifies the required environmental conditions for safe and effective pump operation.
Steps for safely connecting the pump to mains power.
Details common configuration settings for the infusion pump's operation.
How to set the volume level for audible alarms on the pump.
Steps to configure the pump's date and time settings.
Visual guide outlining the sequence of steps for a typical infusion process.
Detailed step-by-step instructions for using the infusion pump's functions.
Step-by-step guide on how to power on the infusion pump and its self-test.
Instructions on how to properly insert the infusion set into the pump.
Steps to remove air from the infusion set before starting infusion to prevent embolism.
Instructions on how to start and monitor an infusion session.
Details how to set and use the infusion pump in Rate Mode.
Explains how to set and operate the pump using Time Mode for infusions.
Instructions for using the Body Weight Mode for calculating dosage.
Settings for detecting and responding to blockages in the infusion line.
How to adjust the pressure threshold for occlusion alarms.
How to configure the pump's sensitivity to detect air bubbles in the line.
Information on selecting compatible infusion sets from the pump's library.
Accessing and viewing past infusion events, alarms, and operations.
Instructions for setting up and using the pump's Wi-Fi connectivity.
Description of visual and audible indicators for different alarm types.
Procedures for managing and responding to different types of alarms.
Specific actions to take to resolve triggered alarms and ensure patient safety.
Steps to optimize battery life and performance through charge cycles.
Detailed procedures and recommended agents for cleaning the infusion pump.
Procedures and recommended disinfectants for sanitizing the infusion pump.
Guidelines for performing regular safety and functional inspections of the pump.
Recommended schedule and tasks for professional maintenance of the pump.
Details the safety classifications and standards the infusion pump complies with.
Classification of the infusion pump according to safety standards like IEC60601-1.
Details the technical specifications of the pump's hardware components.
Details on the internal battery capacity, voltage, and charging time.
Comprehensive table of technical specifications for various pump parameters.
Information on Electromagnetic Compatibility standards the device adheres to.
Glossary of abbreviations for units of measurement used in the manual.
Glossary of technical terms and their meanings.
To Next Page