Need help?Do you have a question about the Mindray BeneFusion VP3 Vet and is the answer not in the manual?
General| Brand | Mindray |
|---|---|
| Model | BeneFusion VP3 Vet |
| Category | Medical Equipment |
| Language | English |
Details exceptions to the warranty policy for the infusion pump.
Explains the primary goal of the operator's manual for safe use.
Identifies the target professionals for this infusion pump manual.
Provides essential safety information, including warnings and cautions.
Lists and explains various symbols used on the infusion pump and in the manual.
Provides a general description of the infusion pump and its intended use.
Details the components and controls visible on the front of the infusion pump.
Covers the initial setup and physical installation of the infusion pump.
Instructions for attaching the standard pole clamp to an IV stand.
Steps for using the optional advanced pole clamp for mounting the pump.
How to change the volume settings for audible alarms on the infusion pump.
Instructions for adjusting the display brightness to optimize visibility and save power.
Procedure for setting the current date, time, and their respective formats.
A visual flowchart outlining the sequence of steps for performing an infusion.
Step-by-step instructions on how to power on the infusion pump and its self-test process.
Guides on correctly loading the infusion set into the pump for operation.
Details the Rate Mode for infusion, covering units and parameter ranges.
Explains the Keep Vein Open (KVO) function and how to set its rate.
Information on accessing and using the built-in drug library for infusion.
How to adjust the occlusion pressure threshold for safety and alarm management.
How to select the desired unit of pressure (mmHg, kPa, bar, psi).
Accessing and viewing stored records of past infusion events and data.
How the pump saves data and settings during unexpected power loss.
Configuring the nurse call function for patient monitoring systems.
Classification of alarms based on severity (high, medium, low).
Details the different types of alarms, their visual and audible indicators.
General guidelines for maintaining the cleanliness and condition of the device.
Instructions for regularly cleaning the infusion pump and its components.
Pre-use and periodic inspection criteria to ensure the pump's proper functioning.
Details the safety classifications and standards met by the infusion pump.
Classifies the infusion pump according to IEC60601-1 standards for safety.
Technical specifications for the infusion pump's monochrome LCD display.
Details about the internal battery, capacity, voltage, and power supply time.
Information on the indicator lights (LEDs) for alarm, AC/DC, and battery status.
Requirements for infusion sets used with the pump, and relevant standards.
Specifies the adjustable infusion rate range and minimum increments.
States compliance with IEC 60601-1-2 for electromagnetic compatibility.
Presents a table detailing alarm types, reasons, and countermeasures.
A glossary of abbreviations for units of measurement used in the manual.
A list and explanation of symbols found in the manual and on the device.
To Next Page