5-4
5.4 Sequential Mode
Several different sequences (parameter group) can be set in Sequential Mode, and
the infusion pump infuses according to the set infusion sequence.
5 sequences can be set in this mode. The rate of the current sequence can be
changed during the operation process. In Sequential Mode, the VTBI, Rate, and
Time are settable and the ranges of the set values are taken to be the same with
Rate Mode.
: A sign denotes the total VTBI and the total time of all sequences.
If only set [Rate] or [VTBI] for a sequence, the sequence is invalid.
If there is invalid sequence between sequences, the infusion can not be
started.
To Next Page
Loading...
