3-8
3.3 Restore Factory Default
During operation, you may change some settings in some situations. However, the
changes may not be appropriate or correct, especially when animal or infusion set
brands are changed. Therefore, you should restore to the default factory settings
during operation according to actual needs, to guarantee that each configuration of
the infusion pump is applicable for clinical use. For some default factory settings of
this equipment, please refer to A.4 Specifications.
Select [Main Menu]→[Manufacturer Maintenance]→Input Manufacturer
Maintenance Password→[Factory Default], and restore the factory default settings
as prompted on screen, some parameters will be restored to default values.
To Next Page
Loading...
