Install the equipment in a position where it can be easily accessed for
inspection, operation and maintenance.
Keep this Operator’s Manual near to the equipment for future ease of
reference.
The software was developed in compliance with IEC62304. The
possibility of hazards arising from software errors is minimized.
This Operator’s Manual describes the most complete functional
configuration of the equipment. The product you are using may not have
some of the settings or functions described herein.
Do not insert devices that are not specified by the manufacturer into the
multifunction interfaces.
During infusion, the infusion pump can accurately control the rate,
infusion volume and infusion time, and monitor the operation in
real-time, to effectively prevent over currents, under currents and
instances of backflow.
The device is not in touch with the drugs or animals directly. Thus, there
is no need to process Biocompatibility test on it.
To Next Page
Loading...
