Mindray BeneFusion VP5 - Setting Parameters; Occlusion Pressure; Set Occlusion Pressure

2-3
6. <DIRECTION>
Used for adjusting value, changing lines and pages.
7. <CLEAR/BACK>
 Under the setting status, press this key to set the value to "0".
 Edited value is "0", press this key to return the value to the previous value.
 Under non-setting status, press this key to return to the previous menu.
8. <OK>
Used for entering setting status, confirming input operation and saving value.
9. <START>
 After the infusion set is loaded correctly and the infusion parameters are set,
press this key to start the infusion.
 In the [Bolus] settings screen, after bolus parameters are set, press this key to
auto bolus.
10. <STOP>
During infusion, press this key to stop infusion. Infusion stops caused by alarms (such
as Occlusion), press this key to cancel the alarm.
11. <BOLUS >
 During infusion, press this key to enter the [Bolus] settings screen.
 Under non-running status, press this key to to enter the [Purge Air] prompt
screen.
12. <AUDIO PAUSED>
Pauses alarm sound.
13. <POWER>
Used for turning power on, entering in standby state and turning off operations.
14. <MENU>
 Used for entering [Main Menu] interface.
 Under operation status, press and hold this key to lock; in locked state, press and
hold this key to unlock.
15. Battery indicator light
 Steady green: The battery is charging (including shutdown).
 Flashing: The pump is running on battery power.
 Off: There is no battery or the battery is not working.