Mindray BeneFusion VP5 - Standby; Turn off the Pump

4-11
4.2.15 Standby
Under non-running status, press to enter the standby countdown shutdown
interface. Press to modify standby time (range is 00:01-99:59 h:min). The pump
cannot be put in standby mode if there is a high level alarm.
When the standby state is ended, the title bar will display [Standby Time Expired],
press or to cancel alarm.
4.2.16 Turn off the Pump
Follow the steps below to turn off the infusion pump:
1. Disconnect from the patient;
2. Hold down , until the Turn Off progress bar complete, and the power will
turn off.
NOTE
 When powering off normally, the current operating data and saved data
will be autosaved.