42 43
SELECT - Selecting Preset
Discrimination Patterns
MAIN MENU > SELECT
A number of Discrimination Patterns can
be accepted and rejected at one time,
creating a custom Pattern that can be
saved for future use.
Rejecting a target inverses the Pattern
To scroll up or down the Select List:
Press the shift buttons next to the up/
down arrows.
To clear the Discrimination Pattern
Thumbnail (create an All Metal
Pattern):
Press the shift button next to the CLEAR
option.
To accept the Discrimination Pattern:
Press the shift button next to the
Discrimination Pattern once to display
a tick.
To reject the Discrimination Pattern:
Press the shift button next to the
Discrimination Pattern until a cross is
displayed.
Press the
DETECT shortcut button to
continue detecting in Smartfind / Digital
with your new Discrimination Pattern.
Once a new Discrimination Pattern has
been created, it can be saved in one of
six places in the SAVE DISCRIM screen.
To save the new Discrimination
Pattern into the SAVE DISCRIM menu:
Press the shift button next to the
location where you want it to be saved.
The Discrimination Pattern can now be
retrieved from the list of Discrimination
Patterns in the SELECT menu screen.
Saved Patterns are not erased when
factory preset settings are restored.
Be sure to save your new Discrimination
Pattern, otherwise all changes will be lost
once the detector is turned off.
SELECT - Saving
Discrimination Patterns
To Next Page
Loading...
