F3Ci Service Manual
_______________________________________________________________________________________________________________________
49
b
. Assemble the detector and close the detector body as described in Section 3.2 - Closing
the Detector Body.
3.7 Armrest
a. The armrest is a line replaceable unit with or without slide as shown in Figure 86.
3.7.1
Replacing the Armrest
a. To replace the armrest:
•
Prepare a clean well lit workspace.
•
Turn the detector off and remove the batteries.
•
Remove the four 12mm round head screws from the top of the armrest and remove
the armrest.
Figure 83: Correct Position of Wiring Loom Handle
To Next Page
Loading...
