24 25
Auto Tune
Search
Mode
Soil /
Timings
Ground
Balance
Coil /
Rx
CancelTrackingSaltDeep
Patch Sensitive Fixed Double D
MNG
Threshold
Coil
Smart
Point
Search Mode
Each Mode has
factory preset
settings to suit that
style of searching.
Search Modes can
also be customised
to suit different
detecting conditions.
(pg. 28)
Soil/Timings allows
you to change the
electronic pulses/
timings of the
detector to optimise
performance for
different soils and
target types.
(pg. 36)
Ground Balance
reduces the
effect caused by
mineralisation
in the ground.
(pg. 38)
Coil/Rx allows
you to change the
sensitivity and
receive (Rx) fields
of the coil.
(pg. 44)
Auto Tune automatically reduces
electrical interference.
(pg. 33)
Coil Connector
Connects the coil to the control box.
Smart Point is a connection point
for the Quick-Trak button, located on
the handle. Minelab also uses this as a
test port to ensure that your detector
is operating at peak performance
before it leaves the factory.
Threshold is the constant background
audio produced by the detector. This
control increases / decreases the level
of the Threshold.
(pg. 34)
Front Control Panel Rear Control Panel
Function
Select
Setting
On/Off
Hold for FP
Once a function
has been selected,
Setting allows you
to adjust its value.
(pg. 47)
Function Select
scrolls up or down
through the list
of functions.
(pg. 46)
LCD
(Liquid Crystal Display)
Displays all the menu
functions and settings.
Battery Connector
connects the control
box to the battery
and headphones.
On / Off
turns the detector
on and allows you
to restore Factory
Presets.
(pg. 26)
To Next Page
Loading...
Need help?
General
