11
CONTENTS
Wireless Audio (540 only)
Any standard Bluetooth® headphones or earbuds can be
used with the VANQUISH 540, however the use of aptX™ Low
Latency headphones is recommended (such as the Minelab
ML 80 wireless headphones) for optimum wireless audio
performance�
Turn Bluetooth On/Off
Press the Bluetooth button to turn Bluetooth on or off�
Long‑press the Bluetooth button (2�5 seconds) to initiate
pairing�
The Bluetooth button
If no connection is made within 5 minutes, Bluetooth will
automatically turn off�
The Bluetooth icon appears on the display when Bluetooth
is On� It displays the current Bluetooth connection status
depending on its display state�
Rapid flashing: Detector is attempting to pair with
Bluetooth devices�
Solid on: Detector is connected to Bluetooth/Bluetooth
aptX‑LL headphones�
Slow flashing: The detector is attempting to re‑
connect with existing Bluetooth/Bluetooth aptX‑LL
headphones (that were previously paired)
ML 80 Wireless Headphones
VANQUISH 540 Pro‑Pack is supplied with Minelab ML 80
Bluetooth® headphones, powered by Qualcomm® aptX™ Low
Latency audio� These headphones are also available as an
accessory�
Minelab ML 80 Wireless Headphones
(shown with charging cable and optional audio cable)
For detailed information on pairing and other controls, refer
to the instructions supplied with the headphones�
To Next Page
Loading...
Need help?
General
