Need help?Do you have a question about the Minidso DS212 and is the answer not in the manual?
General| Input Voltage Range | ±40 V |
|---|---|
| Channels | 2 |
| Input Impedance | 1 MΩ |
| Sample Rate | 100 MSa/s |
| Display | 7 inch TFT LCD |
| Battery | 3.7V |
| Trigger Modes | Edge, Pulse, Video |
| Connectivity | USB |
| Power Supply | USB |
| Vertical Resolution | 8-bit |
Precautions to avoid personal injury and device damage.
Specifies temperature and humidity conditions for operation and non-operation.
Details performance and product parameters like bandwidth, sampling rate, and dimensions.
Lists modes, trigger types, auto measurement, and signal generator features.
Covers storage, dimensions, battery, and display specifications.
Identifies and describes the physical buttons and ports on the oscilloscope.
Explains how to use the thumbwheels for navigation and parameter adjustment.
Introduces the main display elements like parameter, option, and measurement areas.
Explains the menu items and their corresponding functions in the measurement area.
Details the introduction to the option area and sub-menu structures like Page1, Page2, Page3.
Describes the function of each parameter setting shown in the parameter area.
Instructions for turning the DS212 oscilloscope on, off, and entering DFU mode.
Steps for checking product functionality and connecting probes for initial use.
Explains how to navigate menus, change time base, and adjust voltage using the device controls.
Details on showing/hiding sub-menus, confirming options, and selecting menu items.
Covers adjusting parameters, file management shortcuts, auto-fit, and auto-off settings.
A high-level diagram showing the organization of Page1 Oscillo, Page2 Measure, and Page3 Options.
Specifics for CH_A, CH_B, CH_C voltage, coupling, and TimeBase settings.
Explains trigger modes, sources, thresholds, and cursor functionalities.
Covers window depth, frequency, and duty cycle measurement settings.
Details RMS, Average, Peak-to-Peak, and battery voltage measurement options.
Describes saving/loading files, output signal types, frequency, and duty cycle.
Covers auto power off, menu cycles, calibration, restore, device info, and about sections.
Guidance on charging the battery and indicators for low battery status.
Recommended steps for checking the product upon receipt and identifying potential issues.
Explains FCC and CE markings, and WEEE directive for disposal.
Step-by-step instructions for downloading and installing the latest firmware for the oscilloscope.
To Next Page