miniDSP Ltd – Hong Kong / www.minidsp.com / Features and specifications subject to change without prior notice 12
3.2 MACOS 10.14 MOJAVE AND 10.15 CATALINA
This section describes software download and installation for MacOS 10.14 Mojave and 10.15 Catalina.
This software described in this section runs on macOS 10.14 Mojave and 10.15 Catalina only. Other
versions of OS X / macOS are not supported by the current version of Dirac Live. If you are running an
unsupported version of OS X / macOS, refer to the DDRC-22 User Manual Legacy Support version.
3.2.1 Download and install the DiracLive application
Download the DiracLive application for macOS from https://live.dirac.com/download/.
Double-click on the downloaded file to unzip it. Then double-click on the unzipped installer file to run it. It will
have a name like DiracLive v3.0.0 Setup Darwin.app. We recommend that you accept the default installation
settings. Do not run the application yet.
3.2.2 Download the miniDSP software
If you purchased your processor directly from miniDSP, your software will be available from the User Downloads
section of the miniDSP website when your order ships. To access the download, you will need to be logged into
the website with the account you created when purchasing.
If you purchased your processor from a miniDSP dealer, you will receive a coupon together with the product.
Redeem this coupon at the link below:
• https://www.minidsp.com/support/redeem-coupon
The User Downloads link is visible from the dropdown menu at the top right of the website:
Navigate to the Dirac Series section and then to DDRC-22 Software. Download the zip file under the heading
DDRC-22 software for Dirac 2.0.
After downloading, unzip the file (double-click on it). The unzipped download has a name like
DDRC_22_v1_11_Dirac2. (The version numbers embedded in the folder name may be different.)
To Next Page
Loading...
