To Next PageTo Next Page
Need help?Do you have a question about the miniDSP Flex and is the answer not in the manual?
General| Input Channels | 2 |
|---|---|
| Output Channels | 4 |
| Internal Processing Resolution | 32-bit floating point |
| Bit Depth | 24-bit |
| Product Category | Audio Processor |
| USB Audio Class | USB Audio Class 2.0 |
| Sampling Rate | 96 kHz |
| Channels | 2 |
| Software | miniDSP Plugin |
| Power Supply | 5V DC |
Describes different I/O configurations of the miniDSP Flex.
Explains how to upgrade the miniDSP Flex with Dirac Live room correction.
Illustrates various uses of the miniDSP Flex in audio systems.
Details hardware and OS requirements for running the miniDSP software.
Guide on how to obtain the miniDSP software for your device.
Instructions for installing the miniDSP Device Console on macOS and Windows.
How to view devices connected to your computer or network.
Steps to establish a connection with your miniDSP device.
How to use template devices for offline configuration and editing.
Configuration options for the Device Console software itself.
How to select and manage the available audio input sources.
Managing and using the four onboard presets.
Procedures for saving and loading presets.
Information on how to update the device firmware.
Guide to purchasing and activating the Dirac Live upgrade.
Details the physical controls and connections of the device.
Explains the rear panel connections for different Flex models.
How to connect various audio sources to the miniDSP Flex.
Basic setup for connecting speakers and an amplifier.
Instructions for pairing and using Bluetooth audio.
Information on using the device for USB audio playback.
Setting up USB audio on macOS.
Setting up USB audio on Windows 11.
How to use the included infrared remote control.
How to program a Logitech Harmony remote.
Using a mobile app for remote control via Wi-DG.
Simplified diagram showing how audio signals pass through the device.
Detailed explanation of input channel controls and functions.
How to route audio signals between inputs and outputs.
Practical examples of signal routing configurations.
Setting up the device for 2.1 systems with a subwoofer.
Configuring the device for active 2-way speaker systems.
Detailed explanation of output channel controls.
Detailed guide to using the parametric equalizer filters.
Configuring crossover filters for frequency splitting.
Configuring Finite Impulse Response filters.
Configuring the compressor for dynamic range control.
Steps to migrate from older software to Device Console.
How to update the device's firmware.
Obtaining necessary files for firmware migration.
Process for upgrading the device firmware.
Transferring existing presets to the new system.
Common solutions for audio playback problems.
Steps to resolve the issue of no audio output.
Diagnosing and fixing issues with the soundstage.
How to contact miniDSP support for assistance.
