To Next PageTo Next Page
Need help?Do you have a question about the miniDSP Flex Eight and is the answer not in the manual?
General| Category | Computer Hardware |
|---|---|
| Input Channels | 8 |
| Output Channels | 8 |
| Sample Rate | up to 96 kHz |
| Bit Depth | 24-bit |
| DAC Resolution | 24-bit |
| DAC Sampling Rate | up to 96 kHz |
| ADC Sampling Rate | up to 96 kHz |
| USB Audio | Yes |
| DSP Resolution | 32-bit floating point |
| Input Impedance | 10 kΩ |
| Ethernet | Yes |
| Product Category | Digital Signal Processor |
| Digital Inputs | Toslink, SPDIF, USB |
| Analog Outputs | 8 x RCA single-ended |
| Processing Power | Sharc DSP |
| Output Impedance | 100 Ω |
| USB | USB |
| Software | miniDSP Software |
| Connectivity | USB, Ethernet |
| Power Supply | 12V DC |
Covers connecting to the device, using templates, and console settings.
Manages device presets, including renaming, import/export, reset, and firmware updates.
Describes the physical layout and controls of the device's front and rear panels.
Details the processing stages for incoming audio signals, including gain, PEQ, and FIR.
Explains how to direct signals and the controls available for output channels.
Steps to diagnose and fix common audio playback problems like no sound.
Information on how to contact miniDSP for technical assistance and troubleshooting.
Provides a general description of the miniDSP Flex Eight audio processor.
Details the process and requirements for upgrading the device with Dirac Live room correction.
Lists the hardware and software prerequisites for installing the miniDSP software.
Guides users on obtaining and installing the miniDSP software for device control.
Guides users on how to establish a connection with their miniDSP device for control.
Accesses the parametric EQ and FIR filter settings for input channels.
Managing output channel labels, routing, and accessing parametric EQ settings.
Introduces the Parametric EQ interface, filter editing, and disabling filters.
