miniDSP Flex Eight - miniDSP UAC2 Control Panel

3/15/23, 9:47 AM
Print or save - miniDSP Flex Eight
https://docs.minidsp.com/product-manuals/flex-eight/print_page.html
34/75
miniDSP UAC2 control panel
The current settings of the miniDSPFlexEight can be viewed by opening the miniDSP UAC2 Control Panel from the
Windows Start menu (under the miniDSP Ltd folder). This control panel allows you to view current settings. In addition,
it can be used to set buffer size, although we recommend that you leave this setting at the default. If you are having an
issue with inadequate output volume over USB playback, check the Volume tab.
Flex 8
To see the installed version of the UAC2 driver, use the About tab: