miniDSP Flex Eight - Output Channels Controls; Channel Label, Routing, and PEQ; Crossover, Delay, and Gain; Invert, Mute, and Compressor

3/15/23, 9:47 AM
Print or save - miniDSP Flex Eight
https://docs.minidsp.com/product-manuals/flex-eight/print_page.html
49/75
Output Channels
Each of the eight output channels has a complete "strip" of controls:
Output 1
INVERT
INPUT 2
INVERT
RMS-Meter
(dBFS)
0 DB
-3.5
PEQ
CROSSOVER
Delay (ms)
0
Gain (dB)
0
INVERT
MUTE
COMPRESSOR
Gain adjustment
Time delay in ms
Enable invert
and mute
Edit EQ and
crossover settings
Edit compressor
settings
0 DB
INPUT 1
Signal routing
Level meter
Current
RMS level
Channel label
Each output channel has a customizable label displayed at the top of the channel strip. This label also appears on the
routing matrix. To change the label, click on it, type a new label (up to 12 characters), and press the Enter key.