miniDSP Flex - Migrate Configuration Presets

3/15/23, 9:45 AM
Print or save - miniDSP Flex
https://docs.minidsp.com/product-manuals/flex/print_page.html
84/86
Now that your Flex rmware has been updated to a version that is compatible with DeviceConsole, future rmware
upgrades can be done directly from within DeviceConsole.
6. Migrate your conguration presets
Presets that were previously loaded into the Flex using the miniDSP 2x4 plugin will automatically be imported into
DeviceConsole.
If no existing presets are found, you will be prompted to initialize the presets to defaults when you connect to the Flex.
In that case, click on Initialize to default settings.
No saved settings
No saved settings for Flex have been found. Would you like to:
Initialize to default settings
Disconnect