miniDSP Flex - Time Delay; Gain Adjustment

3/15/23, 9:45 AM
Print or save - miniDSP Flex
https://docs.minidsp.com/product-manuals/flex/print_page.html
56/86
Signal routing
Sets the routing from input channels to output channels. See Signal routing.
PEQ
Click on this button to open the parametric EQ settings window for that output channel. There are 10 parametric EQ
lters on each input channel. See Parametric EQ.
CROSSOVER
Click on this button to open the crossover settings window for that output channel. See Crossover.
FIR
Click on this button to open the FIR ltering window for that output channel. A total of 4096 can be computed. See FIR
ltering.
Time delay
A delay of up to 80 ms can be applied to each output channel. To set the delay, click on the delay button for a channel.
The delay value can be entered by moving the slider or it can be entered numerically. The up and down arrows can be
used to change the delay in 0.01ms increments.
Gain adjustment
The gain of each output channel can be set to a value between ‑72dB and +12dB. (0 dB, the default, is unity gain or no
change in level.) To set the gain, click on the Gain value of that channel. The gain can be entered by moving the slider
or it can be entered numerically. The up and down arrows can be used to change the gain in 0.1dB increments.
Invert
Each output channel can be inverted in polarity. To invert, press the Invert button. The status is indicated by a change
in color and label:
INVERT
INVERTED
Channel is not inverted Channel is inverted
Mute