miniDSP Flex - The miniDSP Device Console; Finding Connected Devices; Connecting to a Device

3/15/23, 9:45 AM
Print or save - miniDSP Flex
https://docs.minidsp.com/product-manuals/flex/print_page.html
13/86
The miniDSP Device Console
The miniDSPDeviceConsole ("DC") is the new conguration and control software for miniDSP audio processors. It
replaces the earlier "plugin" control software. In contrast to the earlier software, DeviceConsole provides:
A single software program to control all miniDSP processors
Over-the-air (OTA) self-updates
Detection and installation of rmware upgrades for your processor
Purchase and activation of Dirac Live upgrades (where applicable)
If you have not used DeviceConsole with your Flex before, you will need to perform a one-time migration procedure.
See Migrating to DC.
Finding connected devices
The Discover Devices screen displays devices connected to your computer, or which have a network-accessible
control interface.
Main M enu
Choose your device:
Devices plugged into your network / USB are shown below.
Flex Eight
Serial#: 900001
USB
VID: 10066 PID: 18
SHD
Serial#: 902607
USB
VID: 10066 PID: 69
Discover Devices
Template Devices
Settings
About
Version History
For network control, the miniDSPFlex requires that a miniDSP Wi-DG be connected to its USB port.
If your device is connected to a Wi-DG but is not visible here, conrm that you have updated the rmware on your Wi-DG
to the latest version.
Connecting to a device
Info
Tip