miniDSP Ltd, Hong Kong / www.minidsp.com / Features and specifications subject to change without prior notice 16
6 USING THE UMIK-2 WITH DIRAC LIVE
The UMIK-2 is fully compatible with Dirac Live (version 3 or later). The UMIK-1 and UMIK-2 are the only
microphones supported by miniDSP for use with its Dirac-Live enabled processors.
1. Install the software for your processor as instructed by your product’s user manual.
2. Connect the microphone to the computer. Figure 1 illustrates a typical setup.
3. Follow the procedure in the miniDSP Dirac Live User Manual to load the calibration file and perform
measurements.
To Next Page
Loading...
