Do you have a question about the miniDSP USBStreamer Box and is the answer not in the manual?
audio sample rate IS2/TOSLINK mode | 44.1 to 192 kHz (10 channels) |
---|---|
audio sample rate ADAT mode | 44.1 or 48 kHz (8 channels) |
low sample rate mode | 8 to 192 kHz (8 channels) |
audio resolution | 24-bit integer |
dimensions (H x W x D) | 13 x 40 x 62 mm |
---|
audio sample rate IS2/TOSLINK mode | 44.1 to 192 kHz (10 channels) |
---|---|
audio sample rate ADAT mode | 44.1 or 48 kHz (8 channels) |
low sample rate mode | 8 to 192 kHz (8 channels) |
audio resolution | 24-bit integer |
dimensions (H x W x D) | 24 x 64 x 67.4 mm |
---|
Details hardware and operating system requirements for Windows users.
Details hardware and operating system requirements for Mac users.
Outlines product usage liability, warnings, and warranty coverage.
Covers FCC and CE compliance statements for device operation.
Provides guidance on how to read and navigate the user manual.
Explains the function and usage of different firmware types.
Describes physical connections for USB and optical audio interfaces.
Details the I2S/TDM interface for the USBStreamer kit version.
Illustrates the pin assignments for I2S and TDM headers on the circuit board.
Explains the master clock (MCLK), frame sync (LRCLK), and bit clock (BCLK).
Details clock lines for Time Division Multiplexing (TDM) audio.
Describes the input and output data lines for I2S audio channels.
Explains the connection for an external 5V DC power supply.
Guide to downloading the USBStreamer driver and associated software.
Step-by-step instructions for installing the USB driver on Windows.
Instructions for updating the USBStreamer's firmware version.
Overview of the control panel for managing device settings and status.
Instructions for updating firmware on Mac using the Terminal application.
How to configure the USBStreamer using macOS Audio MIDI Setup.
Lists key technical specifications of the USBStreamer device.
Provides instructions on how to get technical support and help.