miniDSP Ltd, Hong Kong / www.minidsp.com / Features and specifications subject to change without prior notice 12
3.3 LOADING FIRMWARE
If the default firmware loaded into your USBStreamer as shipped is not suited for your application, you will need to
load a different firmware version. (You do not need to load firmware if the default firmware is suitable for your
application.)
• USBStreamer B (box) has ADAT firmware loaded when shipped.
• USBStreamer kit has TOSLINK/I2S firmware loaded when shipped.
To load a different firmware version:
1. Connect the USBStreamer to your computer via USB (if not already connected).
2. Browse to the Firmware\miniDSP_UAC2_DFU\ under the driver zip file. Start the miniDSPUAC2Dfu.exe
3. The firmware update program will start:
To Next Page
Loading...
