miniDSP Ltd, Hong Kong / www.minidsp.com / Features and specifications subject to change without prior notice 24
If more than eight ADAT channels are required, use two USBStreamers and load firmware with different IDs into
each. (That is, load ID3 into one USBStreamer and ID4 into the other.) Depending on the specifics of your system
setup (DAW, external hardware, etc.), you can create a 16-channel aggregate device in Audio MIDI Setup:
4.2.3 LowSampleRate firmware
Open the program Audio MIDI Setup (in Applications->Utilities). Click on the device USBStreamer that appears in
the list of devices on the left, to show the eight I2S output and input channels. The Format dropdown provides
selection of sample rates down to 8 kHz:
To Next Page
Loading...
