GENERAL
1.10 SP1
BC_GB1
STANDARD EQUIPMENT
Read out of work thickness
Aut-brake motor
150 mm. diam. exhaust hood
Sectional pressers infeed
Powered raising of thicknessing table
Infeed and outfeed protection straps
Knife adjustment device
4 knives
Direct start of main motor
Set of spanners for servicing
Manual zero-star-delta starting
OPTIONAL
Thicknessing table with 2 rollers and 1 top steel roller outfeed
1st Sectional feed roller of steel
Spindle with "TERSA" throw-away knives
To Next Page