SP1 1.13
GENERAL
BC_GB1
8- Dust hood must always be connected to dust exhaust system. Only start working when dust exhaust system
has been switched on.
9- Working environment must be well lit and with sufficient space for working and servicing, so that there is
no danger for operator and no possibility of slipping.
10- Start work only when cutterblock has reached the correct speed
11- Use roller or extension tables when processing long work pieces.
MAINTENANCE SAFETY
1- If you stop the machine to carry out adjustments or to disassemble a component, turn the main switch to
zero, indicating this on a card and then padlock the main switch
2- Stop the machine completely before proceeding with cleaning or before removing the guards for maintenance
operations.
3- General cleaning of the machine (particularly the worktable) and the floor around the machine is an important
safety factor.
4- Use proper gloves prescribed by safety norms when handling blades or knives.
To Next Page
Loading...