SP1 1.7
GENERAL
BC_GB1
TOOLING
The machine has been designed for the exclusive use of tools conforming to EN847-1 Norms and
suitable for the material to be used and for hand feeding.
The term "hand feeding intends components guided by hand or feeding incorporated in the machine.
WORKING ENVIRONMENT
The machine can be used in the following environment:
Max. 90% humidity
Temperature min. + 1°C, max. 40° C
Height max. 1000 mt. above sea level (if higher please consult manufacturer)
Always connect machine to dust exhaust system which must be of sufficient capacity (see par. 2-4)
The machine can only be run indoors
The machine is designed for use in an industrial environment
The machine cannot be used in an environment where explosives are stored
CONDITIONS FOR USE
* do not use the machine in a different way from the one described above
* do not use the machine without safety guards foreseen for each job neither remove guide parts
* do not use the machine to process different materials from the ones indicated or pieces of
different dimensions to the ones previously specified
* tools must not be used which are not in accordance with EN847-1 norms
* the user will be held responsible for damages due to the wrong use of the machine
* no alterations must be made to the machine
* in case of modifications carried out on the machine, the machine compliance statement is no more valid.
The user is responsible for the damages caused by the worng use of the machine
To Next Page
Loading...